Home >> Nitrile Buna-N Gaskets

Nitrile Buna-N Gaskets : American Seal and Packing

1st Seal company to put a seal portal on-line customers could now order 24/7.

Online Shop : USSEAL.COM Established 1994 »

Order Free Gaskets Quote

Buna Gaskets

Buna Gaskets

We cut Buna Gaskets from any of the following Buna gasket materials.

Buna is one of the most commonly used rubber gasket materials. Second only to SBR due to it's high use in automotive tires. Due to it's resistance to oils Buna-N (also refered to as Nitrle) is commonly used in a wide range of industrial applications.

Nitrile (Buna-N)

Trade Names:
Chemigum Hycar (Zeo (Goodyear)n Chemical) Ny Syn (Copolymer) Paracril (Uniroyal) Krynac (Polysar) Perbunan (Mobay)
The most widely used 0-Ring elastomer. Excellent resistance to petroleum products. Excellent compression set, tear and abrasion resistance. Does not have good resistance to ozone, sunlight, or weather, unless specifically compounded. Should not be stored in direct sunlight or near motors or other electrical equipment which may generate ozone. Temperature range: -40° to +250°F.

STYLE 0726T - Buna-N 70 Durometer for Transformer Gaskets and Strip Especially selected for the fabrication of gaskets and strip for transformers. High resistance to transformer oils. Durometer 70±5.

Tensile strength 1500 PSI
Elongation 250%
Temperature range -30°F to 250°F


STYLE 0726H - Buna-N 90 Durometer Gaskets Good resistance to many oils and chemicals.
Durometer 90±5:

Tensile strength 1500 PSI.
Elongation 100%.
Temperature range -30°Fto250°F

STYLE 0726W - Buna-N White 50-65 Durometer Gaskets

Manufactured from FDA approved ingredients oil resistance to oily and greasy food products. Good resistance to abrasion. Non-toxic and non-marking.
Durometer 55+10/-S.

Tensile strength 1000 PSI
Elongation 400%
Temperature range -20° F to 200° F
 

  • Aflas sheet gasket material

    AFLAS GASKETS

    We cut gaskets from Aflas sheet gasket material. Aflas is an elastomeric based flouorubber, a copolymer of tetrafluroethlene and propylene.

    Continue Reading »

  • EPDM Cut Gaskets

    EPDM GASKETS

    EPDM gaskets provide excellent chemical resistance*, and good electrical properties. This material meets ASTM D-2000-2BA specifications.

    Continue Reading »

  • Nitrile Gaskets

    Nitrile Gaskets

    We cut Nitrile Gaskets (also called Buna-N) from any of the following Nitrile gasket materials. Nitrile-N Gaskets Good resistance to many oils and chemicals.

    Continue Reading »


Ph: 714-361-1435           Fax: 714-593-9701

E-Mail: sales@americansealandpacking.com

Call American Seal & Packing for your gaskets.