>
Armstrong Gaskets
We cut Gaskets from any of the following Non-Asbestos Gasket Materials.
STYLE 0782
Plant Fiber Rubber Beater Saturated (Armstrong CS-301)
Made from cellulose
fibre, cork, and styrene butadiene rubber (SBR). A tendency to swell
moderately without disintegrating in water or oil makes this fibre
sheet a dependable seal in services not involving aromatic fuels and
solvents. Tensile strength minimum 700 PSI. Temperatures to 300°F.
STYLE 0783 Plant
Fiber Buna-N Beater Saturated (Armstrong CN-705)
Made from cellulose
fiber, cork, and Buna-N. It is generally suitable for oil, gasoline,
and water services. Combines high compressibility and high crush
strength. Tensile strength minimum 1000 PSI. Temperatures to 300°F.
STYLE 0792
Cork
and Neoprene Medium Hardness (Armstrong DC-i 00)
A neoprene rubber
sheet to which
very
fine cork particles
have been added to create a homogeneous material with great
compressibility combined with the resiliency of neoprene. A general
purpose gasket and sealing material that has high cork content,
minimum side flow. An excellent material for very narrow flange
gaskets and for low bolt load applications.' For oil, non-aromatic
petroleum derivatives, fatty oils, and solvents (except chlorinated,
aromatic, or ketone types). Shore A Hardness 55 to 70. Temperatures
to 275°F.
STYLE 0792A
Cork
and Neoprene Soft (Armstrong DC-i 79)
Same type material
as Style 0792, only slightly softer, giving greater compressibility.
Shore A Hardness 50 to 65.
STYLE 0793
Cork
and Buna-N Medium Hardness (Armstrong NC-71 0)
Buna-N sheet with
fine particles of cork added, providing a homogeneous material with
great compressibility combined with maximum resiliency of Buna N.
Excellent for narrow flange gaskets and for low bolt load
applications. For oil and non-aromatic petroleum derivatives. Shore
A Hardness 55 to 70. Temperatures to 275° F.
STYLE 0793A
Cork
and Buna-N Soft (Armstrong NC-757)
Same type material as Style 0793,
except slightly softer giving greater
compressibility.
Shore A Hardness 50 to 65.
STYLE 0793B
Cork and
Buna-N Firm (Armstrong NC-711)
Same
type
material as Style 0793, except firm. Shore A Hardness 70 to 85.
STYLE 0794
Cork and
Synthetic Sponge Rubber Adhesive Backed (Armstrong DK-1 53T)
Cork and sponge rubber composition
that combines lasting resilience with high surface friction. It is
used to eliminate squeaks, cushion fragile parts, make slippery
surfaces non-skid, and to absorb shock or relative motion between
adjoining parts of an assembly. It has a strong,
pressure-sensitive adhesive, protected with a polyethylene fiber..
STYLE 0794FC
Cork and Synthetic
Sponge Rubber Tape, Adhesive Backed (Armstrong DK-1 53T)
Same as Style 0794, except in tape
form. Material is slit to your required widths.
STYLE 0N8051
Impervapac
Nitrile Binder (Armstrong N-8051)
Recommended
for low internal pressure and low flange pressure applications (up
to 2000 PSI). Moderate oil resistance. Nitrile Butadiene
STYLE 0N8090
Syntheseal Latent
Cure Nitrite Binder (Armstrong N-8090)
Armstrong
Syntheseal non-asbestos gasket materials are designed to be a direct
substitute for asbestos-containing materials. Style 0N8090 is a
reinforced cellulose fiber and a Latent Cure nitrile butadiene
binder. The Armstrong Latent Cure system is formulated for initial
conformability which helps seal rough flanges. The presence of heat
in the application activates ingredients which vulcanize the
material to provide the benefits of Fully Cured products. This
provides Style 0N8090 with outstanding sealing characteristics.
Excellent oil resistance. Temperatures below 350°F. Minimum tensile
strength 2000 PSI.
STYLE
0N8092 Syntheseal Fully Cured Nitrile Binder (Armstrong
N-8092)
Armstrong
Syntheseal non-asbestos gasket materials are designed to be a direct
substitute for asbestos-containing materials. Style 0N8092 is a
reinforced cellulose fiber and a Fully Cured nitrile butadiene
binder. The Armstrong Fully Cured system contains rubber binders
which are vulcanized during formulation or in subsequent processes
for added initial strength and fluid resistance. Style 0N8092
excellent crush resistance at high flange pressures. For sealing
oil, fuels, and water. Temperatures below 350°F. Minimum tensile
strength 1600 PSI.
STYLE
0S8091
Syntheseal
Latent Cure Styrene Butadiene Binder (Armstrong S-8091)
Armstrong
Syntheseal non-asbestos gasket materials are designed to be a direct
substitute for asbestos-containing materials. Style 0S8091 is a
reinforced cellulose fiber with a Controlled Swell Latent Cure
Styrene Butadiepe binder. Armstrong Controlled Swell materials are
Latent Cure products Which use Styrene Butadiene Rubber (SBR)
binders. Significant thickness increase occurs.
(Special order.)
at the exposed
initial edge of the gasket with many fluids, dramatically improving
sealability. The heat of application then vulcanizes the material to
limit further swelling and provide Fully Cured performance. For
oils, fuels, and low-pressure steam. Temperatures below 350°F.
Minimum tensile strength 1800 PSI.
STYLE
OTN9001
I
Thermo-Tork Latent Cure Nitrile Butadiene Binder (Armstrong TN-9001)
Armstrong Thermo-Tork
materials are non-asbestos formulated and are designed to outperform
many asbestos-containing products in a wide range of heavy-duty
applications. Style OTN9001 is aramid fiber with a Latent Cure
nitrile butadiene binder. The Armstrong Latent Cure system is
formulated for initial conformability which helps seal rough
flanges. The presence of heat in the application activates
ingredients which vulcanize the material to provide the benefits of
Fully Cured products. Style OTN9001 is designed for heavy-duty
applications up to 750°F. Excellent oil resistance. Minimum tensile
strength 2000 PSI.
STYLE
0TS90131
Thermo-Tork Latent Cure Styrene Binder (Armstrong TS-9013)
Armstrong Thermo-Tork
materials are non-asbestos formulated and are designed to outperform
many asbestos-containing products in a wide range of heavy-duty
applications. Style OTS9O1 3 is a blend of cellulose and aramid
fibers with a Latent Cure styrene binder. The Armstrong Latent Cure
system is formulated for initial conformability which helps seal
rough flanges. The presence of heat in the application activates
ingredients which vulcanjze the material to provide the benefits of
Fully Cured products. Style 0TS9013 is designed for heavy-duty
applications up to 550°F. Recommended for water and oil
applications. Minimum tensile strength 1200 PSI.
| 
